How do I connect to my WireGuard VPN?

1. In the panel, open My servers and click your server.
2. On the Overview tab, wait for the App row to say "WireGuard is ready". The page refreshes itself.
3. Click Open app or the link in the Panel address row. This opens wg-easy, the screen you manage the VPN from.
4. Enter the details from the Login and Password rows. The login is yonetici, which is Turkish for "admin".
5. Create a new client for the device you want to connect, and give it a name.
6. Install the official WireGuard app on your device. On a phone, scan the QR code. On a computer, download the configuration file and add it to the app.
7. Turn the tunnel on in the app. Your internet traffic now goes out through your server.

The rows in your panel

Further down the page, the Username row and the Password row below it are for SSH. Don't use them to log in to wg-easy.

Good to know

• The VPN connection uses port 51820/UDP. The management screen opens on ports 80 and 443, and port 22 is open for SSH. No other ports are open.
• Clients connect to the server by IP address, so you don't need a domain.
• The tunnel carries IPv4 only. IPv6 is turned off.
• Create a separate client for each device. If you lose a device, you only delete its client.
• If you change your password inside wg-easy, the panel keeps showing the original one. Save the new one yourself.

If you can't connect

Some networks block UDP traffic. Try another network, such as your phone's mobile data. If you still can't connect, contact support.

No server yet? Order a server with WireGuard installed: you choose the size and pay for what you choose.